Your cart is empty.
TURNING POINT PROPELLERS 1150 0800 HUB MASTRTORQ 4.75" HONDA
$66.99
Retail price is shown. * Add this item to the Shopping Cart to see your reduced price.
Product Description: Turning Point Propellers MasterGuard Installation Kit 508 (11500800) MasterGuard 500 Series Installation Kit for Engines with 4.25" or 4.75" Gearcases
Lifetime warranty for engines under 200hp with aluminum or stainless steel props and engines 200+hp with aluminum props only.
Turning Point is the only company to offer MasterGuard® Installation kits and prop housings for 6-300+hp engines with a Lifetime Warranty Hub. Boaters save up to 33% when buying a replacement propeller housing. MasterGuard hubs are Re-useable most of the time after a prop strike, and if not, they are Warrantied even if the prop is Destroyed (hub warranty on consumer use only - visit https://tpprops.com/warranty for details) . These hubs offer enhancedlower unit protection.
Turning Point's MasterGuard Hubs are engineered to withstand typical wear and tear over time without risk of spinning or failure under normal operational use. Turning Point's unique patented one piece hub with glass filled nylon over durable marine bronze splines eliminates failures commonly seen in multi-part "sleeve and spline" designs, and pressed-in rubber hub systems.
Eliminate Hub System Vibration and Chatter: Innovative one piece design reduces the number of parts and eliminates failures commonly seen in multi-part hub systems.
Eliminate Hub Cracking and Failure: The glass reinforced high-tech polymer construction increases flexibility, eliminating potential material stress fractures.
Corrosion Resistant Materials: Premium corrosion resistant durable marine bronze splines.
Reduce Gear Shock and Engine/Drive Damage: MasterGuard hubs offer Shock absorbing high-tech polymer cushion with lower unit protection.
Easy to Install: Clear and easy step-by-step directions coupled with minimal parts makes installation easy. ALT Part Numbers: TUR 11500800, 28-6597, 28-6596
Product Description: Turning Point Propellers MasterGuard Installation Kit 508 (11500800) MasterGuard 500 Series Installation Kit for Engines with 4.25" or 4.75" Gearcases
Lifetime warranty for engines under 200hp with aluminum or stainless steel props and engines 200+hp with aluminum props only.
- MasterGuard Installation/Hub Kits carry the only Lifetime Warranty in the WORLD!
- Hubs have no warranty restrictions, except for extreme commercial use.
- Saves a boater up to 33% on replacement propeller purchases (need to purchase prop housing only).
- One piece design: durable marine Bronze with Over Molded Glass Filled Nylon for Long Life.
- Re-useable after a Prop Strike.
- Warranted even if the prop is Destroyed! (consumer normal use only, not applicable on commercial applications)
- Enhanced lower unit protection.
- Warranted even if used in competitive propeller housings(Mercury, Michigan Wheel, Solas)
- Each kit contains a hub, thrust washer, and other hardware for installing Turning Point Express Mach3, Mach3 OS, Mach4, and Hustler propeller housings on most engines with 4.25" or 4.75" gearcase.
- Also used as a hub upgrade to fit Solas Rubex, Michigan Wheel XHS, and Mercury FloTorq propeller housings.
- Installation Kits for Evinrude®, Honda®, Johnson®, Mariner®, Mercury®, MerCruiser®, Nissan®, OMC®, Parsun®, Suzuki®, Tohatsu®, & Yamaha® Outboards and Sterndrives.
- See application chart for engine application information.
Turning Point is the only company to offer MasterGuard® Installation kits and prop housings for 6-300+hp engines with a Lifetime Warranty Hub. Boaters save up to 33% when buying a replacement propeller housing. MasterGuard hubs are Re-useable most of the time after a prop strike, and if not, they are Warrantied even if the prop is Destroyed (hub warranty on consumer use only - visit https://tpprops.com/warranty for details) . These hubs offer enhancedlower unit protection.
Turning Point's MasterGuard Hubs are engineered to withstand typical wear and tear over time without risk of spinning or failure under normal operational use. Turning Point's unique patented one piece hub with glass filled nylon over durable marine bronze splines eliminates failures commonly seen in multi-part "sleeve and spline" designs, and pressed-in rubber hub systems.
Eliminate Hub System Vibration and Chatter: Innovative one piece design reduces the number of parts and eliminates failures commonly seen in multi-part hub systems.
Eliminate Hub Cracking and Failure: The glass reinforced high-tech polymer construction increases flexibility, eliminating potential material stress fractures.
Corrosion Resistant Materials: Premium corrosion resistant durable marine bronze splines.
Reduce Gear Shock and Engine/Drive Damage: MasterGuard hubs offer Shock absorbing high-tech polymer cushion with lower unit protection.
Easy to Install: Clear and easy step-by-step directions coupled with minimal parts makes installation easy. ALT Part Numbers: TUR 11500800, 28-6597, 28-6596
Current Stock:
SKU:
708-11500800
Weight:
1.00 LBS
Width:
6.00
(in)
Height:
3.00
(in)
Depth:
3.00
(in)
Warranty:
Important Note for Boat, Engine and Generator Parts: The responsibility for the accuracy of your order rests with you, the customer. If you have any question as to whether or not the part you are ordering is the right one for your boat/engine/generator, please do not hesitate to call us immediately at 321-952-1303 Monday-Friday 8-5pm. This is important to save both time and money. Carp Coastal Marine will be responsible for any mistakes that we make. However, if you make the decision without consult from us, then restocking and freight charges will be added to your order.
Shipping Cost:
Calculated at Checkout
