Your cart is empty.
SEAHAWK PAINTS 1287/GL TUFF STUFF LOW VOC WHITE GLKIT
$169.19
Retail price is shown. * Add this item to the Shopping Cart to see your reduced price.
Product Description: Sea Hawk Tuff Stuff Low VOC Epoxy Primer, White Tuff Stuff LOW VOC Epoxy Primer complies with rigid VOC limits set by the California Air Quality Management Board and offers a Low VOC alternative when applying water barrier or corrosion protection. Tuff Stuff Low VOC is an extremely high-build two-part epoxy primer that dries fast, enabling application of a complete barrier system and bottom paint in just two days. Using microsheet silicate technology, millions of microscopic sheets overlap and build a 100% water barrier that protects the surface from moisture and water penetration. Tuff Stuff Low VOC is extremely effective for blister prevention on fiberglass, or as a bilge coating, because it is resistant to oil and water. As a universal primer, it can be used for corrosion protection on most metals below the waterline, and for priming any metal.
Product Description: Sea Hawk Tuff Stuff Low VOC Epoxy Primer, White Tuff Stuff LOW VOC Epoxy Primer complies with rigid VOC limits set by the California Air Quality Management Board and offers a Low VOC alternative when applying water barrier or corrosion protection. Tuff Stuff Low VOC is an extremely high-build two-part epoxy primer that dries fast, enabling application of a complete barrier system and bottom paint in just two days. Using microsheet silicate technology, millions of microscopic sheets overlap and build a 100% water barrier that protects the surface from moisture and water penetration. Tuff Stuff Low VOC is extremely effective for blister prevention on fiberglass, or as a bilge coating, because it is resistant to oil and water. As a universal primer, it can be used for corrosion protection on most metals below the waterline, and for priming any metal.
- Use over blistered fiberglass as a repair coat, and over unblistered fiberglass as a barrier coat
- Protects metals from corrosion, including: aluminum, bronze, stainless steel, cast iron and lead - above and below the waterline
- Excellent for priming props, shafts, keels, trim tabs, thru hulls and lower units
- Highest build epoxy - Fewer coats needed
- Longer window between coats makes Tuff Stuff Low VOC easy to use
- Reduced labor and less haul out time
Current Stock:
SKU:
95-1287GLKIT
Weight:
11.50 LBS
Width:
9.00
(in)
Height:
9.00
(in)
Depth:
9.00
(in)
Warranty:
Important Note for Boat, Engine and Generator Parts: The responsibility for the accuracy of your order rests with you, the customer. If you have any question as to whether or not the part you are ordering is the right one for your boat/engine/generator, please do not hesitate to call us immediately at 321-952-1303 Monday-Friday 8-5pm. This is important to save both time and money. Carp Coastal Marine will be responsible for any mistakes that we make. However, if you make the decision without consult from us, then restocking and freight charges will be added to your order.
Shipping Cost:
Calculated at Checkout